ReadyMadeRC
1.3GHZ RECEIVER (V3 WITH 1258 MHZ!)
Excellent filtering | won't get interference from UHF LRS systems like some of the other receivers do. |
CH1 | 1258 MHz |
CH2 | 1280 MHz |
CH3 | 1320 |
CH4 | 1360 |
Frequencies:, ,
Known as being one of the best quality receivers, now ...ReadyMadeRC
LOW PASS FILTER FOR 900MHZ ANTENNAS
Features | Low insertion loss |
ReadyMadeRC
5V REGULATOR WITH A/V PASS-THROUGH 6-17V INPUT
Input Voltage Range | 6-17VDC |
Output Voltage | 5V 500mA Max |
Size | 38mm x 17mm x 10mm |
Specs:, , Weight: 4g,
This custom Ready Made RC, LLC power adapter can help ...ReadyMadeRC
CAMERA/TRANSMITTER CABLE COMBO WITH OSD CABLE OPTIONS
Below is a list for compatibility of the various camera and transmitter cables:, , Transmitter Cables:,
Take out the guesswork and get a better deal by ...ReadyMadeRC
G-FORCE MICROSENSOR - HIGH G SENSOR
Resolution | approx. 0.05 G in each axis |
Power input (Standalone Mode) | 4V to 16V (6V max for High G Sensor) |
Weight | approximately 4 grams (0.15 oz) |
Dimensions | approximately 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |
ReadyMadeRC
LC COMMON MODE POWER FILTER
Revision | Rev3 March 2013 |
Type | passive common-mode low-pass power ripple filter |
Modes | common mode, single mode - jumper selectable |
Maximum voltage | 16V DC |
Maximum current | ~1.5A |
Cutoff frequency at -3dB | 127 Hz (attenuates higher frequencies/noise) |
Voltage drop over filter | 180mV at 900mA |
Maximum voltage ripple | 120mV |
Capacitor | Japanese Polymer Capacitor |
Impedance/ESR | 0.012 Ohm at 100kHz/16V |
Ripple current | 5000mA rms |
Choke | German Common-mode Choke |
Series resistance (DC) | 0.205 Ohm/path |
Wire / trace thickness | twisted 22 AWG / 32 mils |
Operating temperature | -40 °C to +105 °C |
Dimensions | 37.7 L x 8.8 W x 14.5 H mm |
Weight | 8.1 grams (inc. JST connectors) |
Specifications:,
LC power filter - LPF-01 LPF-01 LC Power Filter This ...ReadyMadeRC
RCA MALE TO RMRC SERVO STYLE CONNECTOR
,
This will help you to connect a standard video source ...ReadyMadeRC
RCA FEMALE TO RMRC SERVO STYLE CONNECTOR
,
This will help you to connect a standard video source ...ReadyMadeRC
G-FORCE MICROSENSOR - LOW G SENSOR
Resolution | approx. 0.05 G in each axis |
Power input (Standalone Mode) | 4V to 16V (6V max for High G Sensor) |
Weight | approximately 4 grams (0.15 oz) |
Dimensions | approximately 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |
There are two models available:, The low G sensor measures up to 8g (at least 7g) in each of the 3 axes.,
3-Axis G-Force Microsensors Need to know how many G's you ...ReadyMadeRC
HORNET OSD WITH GPS
For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
GPS speed (Unit | km/h) |
Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
The angle of turning to the return point (Unit | deg) |
Total flight time (Format | “mm.ss”) |
Course angle of flight (Unit | deg) |
(Unit | mA / h) |
Climb rate (Unit | m/s) |
The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
M.I.G. TRACKER (MAGNETIC, INERTIAL, GYRO) (V4)
Power supply range | 2s-3s LiPo |
ReadyMadeRC
FAT SHARK PREDATOR VIDEO GLASSES
FOV (field of view) | 25 degrees diagonal |
Interpupillary (IPD) distance | 63.5mm (fixed) |
Optional diopter lens inserts | -2, -4, -6 dpt Image size |
User Controls | Channel selection |
Power supply | 7 - 13 V (2S/3S supply) |
Power consumption (@7.4V nominal) | 300mA wireless mode |
Weight | 150g |
Note | Fat Shark headsets use Airwaves brand RF modules. |
Package includes:, Predator goggles with integrated 5.8GHz receiver and MIG V4 head tracker, Optics:, Audio:, Stereo (optional headphones available, Electrical:, Antennae:, External (dipole included or circular polarized compatible), Mechanical:, Ergonomic molded headset, Head Tracker:, M.I.G. (magnetic/ inertial/ gyro) V4, Interface:, 3.5mm AV in/out port, Operating Frequencies:, 5.8 Ghz Receiver Module,
Closeout pricing, cannot be back-ordered. FREE SHIPPING! FatShark quality on ...ReadyMadeRC
FAT SHARK PREDATOR V2 250 VIDEO GLASSES W/TRANSMITTER AND CAMERA
FOV (field of view) | 25 degrees diagonal |
Interpupillary (IPD) distance | 63.5mm (fixed) |
Optional diopter lens inserts | -2, -4, -6 dpt Image size |
Power supply | 7 - 13 V (2S/3S supply) |
Weight | 150g |
Note | Fat Shark headsets use Airwave brand RF modules. |
Includes:, , Goggles Optics:, , Audio:, Stereo (optional headphones available, User Controls:, , Electrical:, , Power consumption (@7.4V nominal):, 300mA wireless mode, Antenna:, , Mechanical:, , Interface:, , Operating Frequencies:, , *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
FatShark quality on a budget! Backed by the quick shipping ...ReadyMadeRC
MINI MIC AMPLIFIED MICROPHONE WITH WIRE/CONNECTOR
,
This sensitive electret microphone works with 3-15V power supply and ...ReadyMadeRC
LOW PASS FILTER FOR 1.3GHZ ANTENNAS
Features | Low insertion loss |